Pond Vacuums & Maintenance Tools

Microbe-Lift OPC - Oxy Pond Cleaner

Weekly Maintenance/ No Existing Debris
80 gal. - 200 gal. 1 ½ tbs. (.75oz.)
201 gal. - 500 gal. 3 tbs. (1.5oz.)
501 gal - 1,000 gal. ½ cup (4 oz.)
1,001 gal. - 1,500 gal. ¾ cup (6 oz.)
1,501 gal. - 2,500 gal. 1 cup (8 oz.)

Break Down Unsightly Debris!
Oxy Pond Cleaner will safely yet immediately breakdown accumulated debris from rocks, streams and on waterfalls.

• Uses Oxygen Power to break down unsightly debris
• Especially helpful on streams and waterfalls
• Deep cleans planters and rocks
• Helps to prevent pond odors
• Oxidizes and Detoxifies

Use Weekly to Eliminate Stressful Pond Draining

Microbe-Lift OPC, Oxy Pond Cleaner will safely spot-treat all areas of light-to-heavy accumulations of debris on rocks, waterfalls, streams, planters, etc. Microbe-Lift Oxy Pond Cleaner is 100% safe when used as directed.

DIRECTIONS - Microbe-Lift OPC, Oxy Pond Cleaner is not temperature sensitive but works best in warmer weather. To achieve the best results, manually clean out as much accumulated debris from the pond as possible and shut down waterfalls before cleaning. Do not dilute. To treat areas with debris build up, sprinkle over areas needing treatment. Make direct contact but avoid live plants where possible.

To maintain a continued proper ecosystem in your pond, always add Microbe-Lift PL, or any bacterial/enzymatic treatment, 48 hours after using Microbe-Lift Oxy Pond Cleaner.

CAUTION - Keep out of reach of children.

DOSAGES - BEFORE USE: Use Microbe-Lift Ammonia Test Strips to test for the presence of ammonia in your pond water. If ammonia levels are above 0.8mg/L, DO NOT apply Microbe-Lift OPC, Oxy Pond Cleaner until the ammonia level is brought down below 0.8mg/L. If ammonia levels exceed 1.0mg/L, add Microbe-Lift Ammonia Remover..

Large Ponds & Lakes - apply around perimeter of pond/lakes as much as needed.
Pond Cleaning/ Non-Painted Surfaces - 6 cups (96oz.) per 1,000 sq. ft. of surface area to e cleaned.

After Use - Ammonia levels should be monitored for two days following applications of ANY/ALL oxygen release compounds as they can kill beneficial bacteria in a pond/lake resulting in an ammonia or nitrite spike. Use Microbe-Lift Ammonia Test Strips to test for the presence of ammonia. If your ammonia levels exceed 1.0mg/L., add Microbe-Lift Ammonia Remover to reduce the ammonia level to 0.8mg/L or below.