| |
On This Page
Browse Site
Shop By Manufacturer
Policies
Resource Center
|
|
Aquadyne Model .60
|
 |
Perfectly suited for koi ponds up to 1200 gallons.
Supports up to 30 pounds of fish.
.6 Cubic feet of bead media.
Diameter 16”, height 33”, maximum pressure 50 psi.
Average water to backwash 75 gallons.
Average flow through filter 1000-2200 gph.
Minimum flow for backwash 2800 gph.
Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
Plumbing is 1 1/2” on all ports.
|
| 94003 |
Aquadyne Model .60 |
$100 |
|
Aquadyne Model .60B
|
|
Perfectly suited for koi ponds up to 1800 gallons.
Supports up to 45 pounds of fish.
.6 Cubic feet of bead media.
Diameter 16”, height 33”, maximum pressure 50 psi.
Average water to backwash 25 gallons.
Average flow through filter 1000-2200 gph.
Minimum flow for backwash 2800 gph.
Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
Plumbing is 1 1/2” on all ports.
|
| 94004 |
Aquadyne Model .60B |
$100 |
|
Aquadyne Model 1.1
|
 |
Perfectly suited for koi ponds up to 2500 gallons.
Supports up to 55 pounds of fish.
1.1 Cubic feet of bead media.
Diameter 18”, height 34”, maximum pressure 50 psi.
Average water to backwash 125 gallons.
Average flow through filter 1000-3000 gph.
Minimum flow for backwash 3800 gph.
Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
Plumbing is 1 1/2” on all ports.
|
| 94005 |
Aquadyne Model 1.1 |
$100 |
|
Aquadyne Model 1.1B
|
|
Perfectly suited for koi ponds up to 3500 gallons.
Supports up to 65 pounds of fish.
1.1 Cubic feet of bead media.
Diameter 18”, height 34”, maximum pressure 50 psi.
Average water to backwash 30 gallons.
Average flow through filter 1000-2800 gph.
Minimum flow for backwash 2200 gph.
Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
Plumbing is 1 1/2” on all ports.
|
| 94006 |
Aquadyne Model 1.1B |
$100 |
|
Aquadyne Model 2.2
|
 |
Perfectly suited for koi ponds up to 5000 gallons.
Supports up to 120 pounds of fish.
2.2 Cubic feet of bead media.
Diameter 24”, height 42”, maximum pressure 50 psi.
Average water to backwash 250 gallons.
Average flow through filter 1000-4000 gph.
Minimum flow for backwash 4000 gph.
Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
Plumbing is 1 1/2” on all ports.
|
| 94007 |
Aquadyne Model 2.2 |
$100 |
|
Aquadyne Model 2.2B
|
|
Perfectly suited for koi ponds up to 7500 gallons.
Supports up to 120 pounds of fish.
2.2 Cubic feet of bead media.
Diameter 24”, height 42”, maximum pressure 50 psi.
Average water to backwash 50 gallons.
Average flow through filter 1000-4000 gph.
Minimum flow for backwash 2500 gph.
Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
Plumbing is 1 1/2” on all ports.
|
| 94008 |
Aquadyne Model 2.2B |
$100 |
|
Aquadyne Model 2.2BHE (High Efficiency)
|
|
Perfectly suited for koi ponds up to 7500 gallons.
Supports up to 120 pounds of fish.
2.2 Cubic feet of bead media.
Diameter 24”, height 42”, maximum pressure 50 psi.
Average water to backwash 50 gallons.
Average flow through filter 1000-4000 gph.
Minimum flow for backwash 2500 gph.
Includes 3 pre-assembled schedule 80 unions and pre-mounted male adapters.
Plumbing is 2” on all ports.
|
| 94011 |
Aquadyne Model 2.2BHE |
$100 |
|
Aquadyne Model 4.4C
|
 |
Perfectly suited for koi ponds up to 14,000 gallons.
Supports up to 300 pounds of fish.
4.4 Cubic feet of bead media.
Diameter 30”, height 46”, maximum pressure 50 psi.
Average water to backwash 60 gallons.
Average flow through filter 1000-6000 gph.
Minimum flow for backwash 3900 gph.
Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
Plumbing is 2” on all ports.
|
| 94009 |
Aquadyne Model 4.4C |
$200 |
|
Aquadyne Model 8.8-C
|
 |
Perfectly suited for koi ponds up to 28,000 gallons.
Supports up to 480 pounds of fish.
8.8 Cubic feet of bead media.
Diameter 36”, height 48”, maximum pressure 50 psi.
Average water to backwash 90 gallons.
Average flow through filter 1200-6000 gph.
Minimum flow for backwash 3800 gph.
Includes 3 pre-assembled schedule 80 unions and pre mounted male adapters.
Plumbing is 2” on all ports.
|
| 94010 |
Aquadyne Model 8.8-C |
$400 |
|
| 94013 |
Retrofit Blower Kit For Aquadyne 1.1 |
|
| 94021 |
O-ring for the top of the filter |
|
| 94024 |
Aquadyne 1hp replacement blower for .60B - 1.1B |
|
| 94026 |
Aquadyne 1.5hp replacement blower for 2.2B - 8.8C |
|
Clarifying Flow Rates for AquaDyne Filters
The stated average flow rates are strictly an average. You can increase or
decrease the flow rates as you like. However, the maximum filter flow rate is
intended to reflect maximum solids removal while maintaining reasonable biological
contact with the bacteria living on the filter media to effectively remove ammonia
and nitrite from the water system. Minimum backwash flow reflects the flow rate
to most effectively separate solid waste from the bead media and flush the waste
products from the filter with a minimum of water loss. The minimum backwash
flow rate for your Aquadyne bead filter may well be lower depending upon the
amount of fish and plant waste in your koi pond and the frequency in which you
backwash your particular system. All living aquatic environments have many variations
regarding the biological chemistry with regards to active waste products in
the pond. Some may have only fish waste, while others may have fish, plant and
sedimentation waste from soil products washing into the pond. Aquadyne is specifically
designed to operate in all types of pond environments handling most waste with
little difficulty.
AquaDyne Lifetime Warranty
Aquadyne offers a lifetime warranty on all models of the their bead filtration
systems. This warranty covers the main tank, control head and central diffuser
column. If any of these components ever break, due to normal use wear, Aquadyne
will repair or replace the broken piece or pieces at their discretion. Rubber
O-rings and seals are warranted for a period of 2 years. This warranty does
not include damage from freezing, misuse, over-pressurization or subjecting
threaded connections to load bearing stress. As a courtesy, any damage determined
to be the result of such action that is not warrantable will be replaced at
direct factory cost.
|
| Ultima II Bio-Tube Filter |
 |
Designed by Aqua Ultraviolet
Very High Flow Rate.
No Channeling.
Only Minutes To Backwash
Great For Heavy Fish Loads
Media Will NOT Clump Together
Compact Filter Can Be Buried
Works With Low-Amp, High Flow Pumps
This is the next generation of filters and one of the best tools for Koi ponds. The Ultima II
is specifically engineered to meet the environmental demands of koi ponds.The lightweight media
is designed for very high flow rates. There is a patent pending on this tubular media which
has low head loss and a very high biofilm surface. The "Y" shape on the inside and
wings on the outside affords a protective surface under back washing and our patent pending
backwash system will keep the media from clogging. The same properties have been added to this
media in three different sizes with random lengths and diameters to avoid stacking. One cubic
foot of Ultima II biological filter media is equal to 750 square feet of surface area. Cleaning
the filter is done by internal jets. |
California residents add 7.75% tax.
This tax is not reflected in the price, and will be charged in
addition to the tax amount shown. |
| 11181 |
Ultima II 1,000 |
14"d x 23 1/4" h |
.75 |
1,000 gal. |
1,000 gph |
1 1/2" |
|
| 50079 |
Ultima II 1,000
(2" Head) |
14"d x 25" h |
.75 |
1,000 gal. |
1,000 gph |
2" |
|
| 11182 |
Ultima II 2,000 |
16 1/2"d x 33" h |
1.5 |
2,000 gal. |
2,000 gph |
1 1/2" |
|
| 50017 |
Ultima II 2,000
(2" Head) |
16 1/2"d x
34 3/4" h |
1.5 |
2,000 gal. |
2,000 gph |
2" |
|
| 11183 |
Ultima II 4,000 |
20 1/2"d x 38" h |
3.0 |
4,000 gal. |
4,000 gph |
1 1/2" |
|
| 11190 |
Ultima II 4,000
(2" Head) |
20 1/2"d. x
39 3/4"h |
3.0 |
4,000 gal. |
4,000 gph |
2" |
|
| 11188 |
Ultima II 6,000 |
22 1/2"d x
42 3/4" h |
5.0 |
6,000 gal. |
6,000 gph |
2" |
|
| 11187 |
Ultima II 10,000 |
24 1/2"d. x
43 3/4" h |
7.0 |
10,000 gal. |
7,500 gph |
2" |
|
| 11186 |
Ultima II 20,000 |
30 1/2"d x 48" h |
15.0 |
20,000 gal. |
7,500 gph |
2" |
|
| 11191 |
Ultima II 30,000 |
approx.
35 1/2"d x 53" h |
|
30,000 gal. |
7,500 gph |
2" |
|
| 50301 |
Ultima II 30,000
(3" Side Mount Valve) |
approx.
30 1/2" d x
39 3/4" h
(plus valve) |
|
30,000 gal. |
20,000 gph |
3" |
|
| 11189 |
Ultima II 60,000
(3" Side Mount Valve)
For professional installers only. |
approx.
36 1/2"d x
45 1/4"h
(plus valve) |
|
60,000 gal. |
Max. pressure 50 psi |
3" |
|
| 11192 |
Pressure Gauge for Ultima II Filter (a-50057) |
|
| 70012 |
Replacement Ultima II Filter Media 8.5 lb (approx. 1 cu. ft.) |
|
| 70408 |
2" Union for Ultima II Filter (a-40084) |
|
Little Giant Pressurized Biological Filters
|
 |
Little Giant Pressurized Biological Filters can be installed above or under ground. These new pressurized bead filter systems improve filtration and promote the colonization beneficial bacteria. Maintenance is a simple backwash with pressure gauge and seven-way valve – no pads to hose off. Each unit comes with Microbe-Lift PL Beneficial Bacteria.
Features and Benefits:
Fully assembled with biological media, unions and specialty bacteria
Modular abilities yield greater fl ow with lower head loss
Ideal for new or existing large-scale applications
Safe for all types of water features, including water gardens and Koi ponds
Works great with low-amp feature pumps
|
| 566881 |
Little Giant PBF2000 |
16" x 32" |
2000 gal. |
1-1/2" Quick Connect |
|
| 566882 |
Little Giant PBF4000 |
19" x 36" |
4000 gal. |
2" Quick Connect |
|
| 566883 |
Little Giant PBF6000 |
24" x 34" |
6000 gal. |
2" Quick Connect |
|
|
